Thanks to the cooperation between OMNI3D and SMARTTECH it was possible to conduct quality control of 3D printed elements that was used as final parts in the Hussarya 33 supercar from Arrinera Technology S.A.
For the supercar manufacturer print accuracy is very important, especially for parts which are assembled as final products. In this particular case it was a fastening to three-way lights in the front car light. The 3D model was printed on the Factory 2.0 Production System from OMNI3D using the ABS-42 material. Quality control has been commissioned for SMARTTECH which specializes in the manufacturing of optical 3D scanners.
The first step of the quality control process was 3D scanning using the industrial scanner – MICRON3D green 10 MPix. MICRON3D green uses a green LED-based measurement technology that achieves 30% better results than white light.
The following step was an inspection carried out in the Geomagic Control software. This program has many functions such as creation of cross section, dimensioning, thickness verification and more. For the part printed by OMNI3D the dimensional quality control was performed using a reference CAD model and the measurement result.
Engineers accepted a tolerance of 0.3 mm. The entire operation allowed the creation of a deviation map with point deviation information. The most extreme point representing the material shortage used 78,6% of the assumed tolerance. For the opposite point (material excess) the value was 61.8%. This means that the precision of the 3D printed part has been 30% better than expected. What is more, the average of all deviations was -0.033 mm. The average material shortage was equal to -0.133 mm, while the average material excess was 0.112 mm.
Both solutions dedicated to automotive and industry will be presented at Formnext in Germany between 14th and 17th of November at 3.1-C29 stand.
Check the case study below
Watch the video about 3D printing and 3D scanning of Hussarya 33 car part